1000w Grid Tie Inverter for Solar Panels or Battery
— working well with all kinds of Battery
–with internal Limiter / Wi-Fi connection
— Limiter sensor clamp Wi-Fi port (optional )
–Input voltage Range : DC 22V-60V or 45V-90V (optional )
–Output Voltage : AC 110V 120V 220V 230V 240V (automaticly)
![](https://ae01.alicdn.com/kf/HTB1TNGivx1YBuNjy1zcq6zNcXXa2.jpg)
![](https://ae01.alicdn.com/kf/HTB1CzJuvv9TBuNjy0Fcq6zeiFXaO.jpg)
Why we produced the GRID TIE INVERTER WITH LIMITER ?
It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries,the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem
This is the 2nd generation grid tie inverter with limiter.
With the 2nd generation GTIL,we integrated the limit function inside the GTI-We call this internal limiter.In this way,No additional limiter module is needed,reduced customerrsquos cost,more easier for installation.But in case customer install inverter far away from the main circuit breaker,we also enable the 2nd GTIL work with stand-alone limiter,we call this-external limiter.For sure,the inverter can work under normal Grid tie-no limit mode,just set on the nice LCD and save your setting.
New upgraded firmware enable battery or solar limiter current and power model.
User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter .
User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged .
Continuous Power Output
|
980W
|
Peak Power Output
|
1000W
|
Input DC Voltage Range
|
22V-60V/45V ~ 90V
|
Peak power tracking voltage
|
25V-60V/50V-90V
|
AC Output Voltage Range
|
90V-140V/
190VAC ~ 260VAC
|
Output Frequency
|
46Hz~65Hz
|
Standby Power Consumption
|
<0.5W
|
Total Harmonic Distortion
|
<5%
|
Peak Inverter Efficiency
|
92%
|
MPPT Efficiency
|
99%
|
Power Factor
|
0.99
|
Output Wave Form
|
Pure Sine Wave
|
MPPT Function
|
Yes
|
Over Current Protection
|
Yes
|
Over Temperature Protection
|
Yes
|
Reverse Polarity Protection
|
Yes
|
Anti-Island Protection
|
Yes
|
Stackable
|
Yes
|
Weight ( Kg)
|
3.6kg
|
Dimensions (W x H x D)
|
322x196x88 mm
|
Packing List :
![](https://ae01.alicdn.com/kf/HTB1pd8yvv9TBuNjy0Fcq6zeiFXa5.jpg)
A. Solar Grid Inverter with Limiter(built-in)—–1unit
B. AC cable————-1 pcs
C. Limiter sensor clamp & 2m cable (optional ) —-1pcs
D. Wi-Fi port ( optional ) —-1pcs
How to use the Inverter ?
1. Standard Grid Tie Inverter Model
1.1. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load.
1.2. All excess power that is not needed by the load is then exported to the Grid.
1.3. If the Grid fails, then the Grid Tie Inverter will turn off. When the Grid comes back on line. The Grid Tie Inverter will again supply power to the load and any excess power is exported to the Grid again.
1.4. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid.
1.5. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid.
![](https://ae01.alicdn.com/kf/HTB11MIwNFXXXXXbaXXXq6xXFXXXV/112074412/HTB11MIwNFXXXXXbaXXXq6xXFXXXV.jpg?size=31157height=296&width=500&hash=a9d8a7672e9ec2ca37a0d3b44c5dcb29)
![](https://ae01.alicdn.com/kf/HTB1HcZUNFXXXXXFXpXXq6xXFXXXP/112074412/HTB1HcZUNFXXXXXFXpXXq6xXFXXXP.jpg?size=34644&height=338&width=500&hash=5f1898617018b298ba3d959e7d6911fc)
2. Using Grid Tie Inverter With Limiter Model
![](https://ae01.alicdn.com/kf/HTB1gFECNFXXXXavXVXXq6xXFXXXY/112074412/HTB1gFECNFXXXXavXVXXq6xXFXXXY.jpg?size=40528height=369&width=600&hash=abf74f74147a177ac7daf1f065320381)
2.1 The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid.
2.2 The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time.
2.3 The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically.
3. Installation of GTIL With Internal Limiter
![](https://ae01.alicdn.com/kf/HTB1uhcENFXXXXXrXVXXq6xXFXXXO/112074412/HTB1uhcENFXXXXXrXVXXq6xXFXXXO.jpg?size=43333height=395&width=600&hash=db5560a1402eaf0907cb92c77da8c918)
3.1 This installation is not require an additional limiter module,Installation is much easier.Clamp the current sensor cable to the hot wire to measure the current,the internal limiter will auto detect the load power and control the inverter output power,excess power will be well controlled.
3.2 External protective device including dc and ac SPD(Surge protection device),dc and ac breaker,etc is recommended to installed in the system.
4.Limiter Setting on the LCD of the inverter:
The GTIL include three working mode:Work as normal GTI without power limitation.Work under Internal limiter mode and Work under External limiter mode,Pls make your setting on the LCD and save it,details setting operation,pls read the GTI manual.
![](https://ae01.alicdn.com/kf/HTB11cCMaf6H8KJjSspmq6z2WXXak.jpg?size=185284height=800&width=951&hash=8e940e12d423608153cabdf23a579a61)
5 Battery Discharge Power Mode
New upgraded firmware enable battery or solar limiter current and power model.
User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter .
User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged .
6 Limiter Module Specification
![](https://ae01.alicdn.com/kf/HTB1sD5ovx1YBuNjy1zcq6zNcXXa4.jpg)
1. Clamp sensor- Max 100A
2. Wattmeter- Max 9999w
3. Terminal Block-Max 20A
4. Receptacle- max 2000w
5. Clamp sensor signal- 5v AC max mA
6. DC signal Cable- 5v DC, max mA
7. Max 13mm or 0.51in cable.
CE ROHS SGS Certification
NEW CE EN50438
![](https://ae01.alicdn.com/kf/HTB1DOiAadzJ8KJjSspkq6zF7VXay.jpg?size=302285height=903&width=1000&hash=d0606797af8e5ff2e4b10cde53f9514d)
![](https://ae01.alicdn.com/kf/HTB1IUOjOXXXXXaMXpXXq6xXFXXXw/112074412/HTB1IUOjOXXXXXaMXpXXq6xXFXXXw.jpg?size=60761height=234&width=800&hash=f44e5c48904c92f002f059cc0dd292c0)
Standard Fast shipping : 7-9 days to European countries . 7-12 days to South American countries . 7-9 days to Asia count
Return & Refund
30Days Return & Refund .
Unhappy with the Product — Return ; Unhappy with the Service — Return ; Unhappy with the Seller — Return ; No Reason — Return .
Warranty
2 years Warranty for replacement or repair , life time parts support and technical support .
1. GAIA NEW ENERGY is your trusted partner for long term business.We arethe MANUFACUTER of the solar inverter. We are responsible forthe quality of the inverter. The inverter has 2 years guarantee. We provide technical support and service for the inverter the whole life. All inverters would be double tested before shipment to be guaranteed in brand new condition and work perfectly.
2. Returns for exchange are permitted and must be initiated by the buyer within 30 days of receipt. All return items must be in their original condition. Return shipping and handling charge will be at the buyer’s expense first. Please do contact with us for return address, details and any other issues.
3. We will not be responsible for any delay during delivery including but not limited to the customs package checking, strike, force majeure, etc.
4. There might be customs duty in Buyers country .Learning about the duty policy , please contact seller before shipping ..
5. In case there is problem with your order, make sure CONTACT US before leaving negative feedback.
6. Please leave us message if you have any question, we will reply in 24 hours, thank you!
Follow us on: